Wet Underfloor Heating Packs – 30m² to 200m²
Polypipe Single Room Kit systems are the ultimate choice for all homeowners and tradesmen who wish to install a wet underfloor heating pack.
The Polypipe Standard Output Single Room Kit is ideal for single room control, of ground floors in both new build and renovation projects with solid floor constructions. The pipe is fitted onto floor insulation with clips and covered with screed before finally laying the floor covering on top.
Each pack is designed to cover an area in square metres when the pipe is installed at 200mm spacing, and can provide the following heating output.
|Standard Output Pack: Estimated heating output|
|Proposed Floor Finish||Thermal Resistance (Estimate)||Pipe Spacing (mm)||Maximum UFH Output W/m²||*Floor Surface Temperature (ºC)|
|Tile / Stone||0.00 W/m²K||200||115||30|
*Check the maximum floor surface temperature is suitable in accordance with the floor finish manufacturer guidelines.
What’s Included in Your Wet Underfloor Heating Pack:
All of our Polypipe packs include the following products:
- 15mm Barrier Polybutylene Pipe & Pipe Stiffeners
- Pump Set
- Edge Insulation
- Isolation Valves
- Pipe Bends
Please note: NO thermostats or controls are included in this pack, these can be purchased separately.
Please see a list of materials provided with each pack.
Total Amount of Pipe
|Total No. Of Clips||Total No. Pipe Bends||Total No. Of Pump Sets||
|30m² – 2 Zone Pack||2||240||4||200||4||1||50|
|40m² – 2 Zone Pack||2||240||4||400||4||1||50|
|60m² – 3 Zone Pack||3||360||6||500||6||1||50|
|80m² – 4 Zone Pack||4||480||8||500||8||1||50|
|100m² – 5 Zone Pack||5||500||10||1000||10||1||50|
|120m² – 6 Zone Pack||6||620||12||1000||12||1||100|
|140m² – 7 Zone Pack||7||740||14||1000||14||1||100|
|160m² – 8 Zone Pack||8||860||16||1000||16||1||100|
|180m² – 9 Zone Pack||9||980||18||1000||18||1||100|
|200m² – 10 Zone Pack||10||1000||20||1200||20||1||100|
For our full wet underfloor heating product range click here.