The Polypipe single room wet underfloor heating pack provides a robust, reliable solution for any room in your home. The pipe is fitted above insulation and covered with screed before the floor finish is laid over.
Each pack is designed to cover an area in square metres when the pipe is installed at 200mm spacing, to provide the heating output as described by Polypipe below:
|Mean Water Temperature (°C)||Pipe Spacing (mm)||Output (W/m²)||Surface Floor Temperature (°C)|
What’s Included in Your Wet Underfloor Heating Pack:
All of our Polypipe packs include the following products:
- 15mm Barrier Polybutylene Pipe & Pipe Stiffeners
- Edge Insulation
- Pipe Cutter
- Pipe Bends
Please note: NO thermostat is included in this pack and must be bought separately.
To complete your wet underfloor heating pack, please see the table below which explains which products are included in each sized pack.
|Pack Size (m²)||10||15||20||25||30||40||50||60||70||80||90||100|
|Pipe Length (m)||50||80||100||120||150||200||250||300||350||400||450||500|
|Single Room Control Unit (inc Pump)||✔||✔||✔||✔||✔||✔|
|Polypipe Pushfit Manifold Ports & Pump Set||3||3||4||4||5||5|
|Single Zone Master Control Unit||✔||✔||✔||✔||✔||✔|
|4 Zone Slave Unit||✔||✔|
Please Note: Polypipe Wet Underfloor Heating kits should be installed as per the manufacturers instructions, for further information regarding the quality of Polypipe products included in the packs, visit polypipe.com