Wet Underfloor Heating Kit – 20m² to 200m²
Pinnacle Multi Room Kit systems are the ultimate choice for all homeowners and tradesmen who wish to install a wet underfloor heating pack.
The Pinnacle Standard Output Multi Room Kit is ideal for multiple room control, of ground floors in both new build and renovation projects with solid floor constructions. The pipe is fitted onto floor insulation with clips and covered with screed before finally laying the floor covering on top.
Each pack is designed to cover an area in square metres when the pipe is installed at 200mm spacing, and can provide the following heating output.
|Standard Output Pack: Estimated heating output|
|Proposed Floor Finish||Thermal Resistance (Estimate)||Pipe Spacing (mm)||Maximum UFH Output W/m²||*Floor Surface Temperature (ºC)|
|Tile / Stone||0.00 W/m²K||200||115||30|
Estimated heating outputs in accordance to BS EN 1264 for 16mm UFH pipe within 75mm floor screed.
Figures based on achieving 20ºC internal room temperature, with a mean water temperature of 45ºC (50ºC Flow, 40ºC Return), which is suitable for systems fed from conventional heat sources i.e boilers.
If the heating source is a Heat pump, the system flow temperature will be reduced, decreasing the heat output achieved by the UFH system. If the mean water temperature is 40ºC, the heating output will reduce by an estimated 20%, if the mean water temperature is 35ºC, the heating output will reduce by an estimated 40%.
*Check the maximum floor surface temperature is suitable in accordance with the floor finish manufacturer guidelines.
Pinnacle Multi Room Kit Includes the following:
1 Manifold, complete with adjustable flow gauges, drain and fill valves, automatic air vents, 2 isolation valve and ball valves. Offset flow and return rails. Instructions included.
- Euroconus Fittings to connect pipe to manifold
- Clips for fixing pipe to floor insulation
- Underfloor Heating pipe PE-Xa UFH Barrier Pipe
- Pump set (Thermomix UFH control pack) includes Grundfos circulating pump and Reliance mixing valve
- Edging insulation – 150mm x 8mm
- Pipe Bends
Please see a list of materials provided with each pack.
Total Amount of Pipe
|Total No. Of Clips||Total No. Pipe Bends||Total No. Of Pump Sets||
|30m² – 2 Zone Pack||2||240||4||200||4||1||50|
|40m² – 2 Zone Pack||2||240||4||400||4||1||50|
|60m² – 3 Zone Pack||3||360||6||500||6||1||50|
|80m² – 4 Zone Pack||4||480||8||500||8||1||50|
|100m² – 5 Zone Pack||5||500||10||1000||10||1||50|
|120m² – 6 Zone Pack||6||620||12||1000||12||1||100|
|140m² – 7 Zone Pack||7||740||14||1000||14||1||100|
|160m² – 8 Zone Pack||8||860||16||1000||16||1||100|
|180m² – 9 Zone Pack||9||980||18||1000||18||1||100|
|200m² – 10 Zone Pack||10||1000||20||1200||20||1||100|
For our full wet underfloor heating product range click here.
Controls can be purchased separately.