Wet Underfloor Heating Packs – 30m² to 200m²
Emmeti Multi Room Kit systems are the ultimate choice for all homeowners and tradesmen who wish to install a wet underfloor heating pack.
The Emmeti Standard Output Multi Room Kit is ideal for single room control, of ground floors in both new build and renovation projects with solid floor constructions. The pipe is fitted onto floor insulation with clips and covered with screed before finally laying the floor covering on top.
Each pack is designed to cover an area in square metres when the pipe is installed at 200mm spacing, and can provide the following heating output.
| Standard Output Pack: Estimated heating output | ||||
| Proposed Floor Finish | Thermal Resistance (Estimate) | Pipe Spacing (mm) | Maximum UFH Output W/m² | *Floor Surface Temperature (ºC) |
| Tile / Stone | 0.00 W/m²K | 200 | 115 | 30 |
| Vinyl | 0.05 W/m²K | 200 | 90 | 28 |
| Timber | 0.10 W/m²K | 200 | 75 | 27 |
| Carpet | 0.15 W/m²K | 200 | 65 | 26 |
Estimated heating outputs in accordance to BS EN 1264 for 16mm UFH pipe within 75mm floor screed.
Figures based on achieving 20ºC internal room temperature, with a mean water temperature of 45ºC (50ºC Flow, 40ºC Return), which is suitable for systems fed from conventional heat sources i.e boilers.
If the heating source is a Heat pump, the system flow temperature will be reduced, decreasing the heat output achieved by the UFH system. If the mean water temperature is 40ºC, the heating output will reduce by an estimated 20%, if the mean water temperature is 35ºC, the heating output will reduce by an estimated 40%.
*Check the maximum floor surface temperature is suitable in accordance with the floor finish manufacturer guidelines.
Emmeti Multi Room Kit Includes the following:
1 Manifold includes 2 drain off/fill valves; an automatic air vent; pressure gauge; 2 blanking plugs. Instructions included.
- Monoblocco fittings to connect pipe to manifold
- Clips for fixing pipe to floor insulation
- Underfloor Heating pipe PE-Xa UFH Barrier Pipe
- Pump set TM3-R
- Set of Ball Valves
- Edging insulation – 150mm x 8mm x 50m
- Pipe Bends
Please see a list of materials provided with each pack. (Actuators and Controls are sold separately).
| Pack Size |
Manifold Port Size |
Total Amount of Pipe (metres) |
Total No. Pipe Connectors |
Total No. Of Clips | Total No. Pipe Bends | Total No. Of Pump Sets |
Edging Insulation (metres) |
| 30m² – 2 Zone Pack | 2 | 240 | 4 | 200 | 4 | 1 | 50 |
| 40m² – 2 Zone Pack | 2 | 240 | 4 | 400 | 4 | 1 | 50 |
| 60m² – 3 Zone Pack | 3 | 360 | 6 | 500 | 6 | 1 | 50 |
| 80m² – 4 Zone Pack | 4 | 480 | 8 | 500 | 8 | 1 | 50 |
| 100m² – 5 Zone Pack | 5 | 500 | 10 | 1000 | 10 | 1 | 50 |
| 120m² – 6 Zone Pack | 6 | 620 | 12 | 1000 | 12 | 1 | 100 |
| 140m² – 7 Zone Pack | 7 | 740 | 14 | 1000 | 14 | 1 | 100 |
| 160m² – 8 Zone Pack | 8 | 860 | 16 | 1000 | 16 | 1 | 100 |
| 180m² – 9 Zone Pack | 9 | 980 | 18 | 1000 | 18 | 1 | 100 |
| 200m² – 10 Zone Pack | 10 | 1000 | 20 | 1200 | 20 | 1 | 100 |
Controls can be purchased separately.
For our full wet underfloor heating product range click here.
Reviews
There are no reviews yet.